Required Engineer and Other Technical Staff in Saudi Arabia

1-Requirements for the Engineers

Electro Mechanial Company - Jeddah Required following Category of Employees:-

1- Mechanical enginers (2)
2-Electrical Engineers (2)
3-Drivers (1)

Please send your CV to hrgbec@gmail.com

2-Requirements for the Mechanical Engineer

One of the leading HVAC Company is looking for "Mechanical HVAC Engineer This candidate will possess technical and engineering aspects of HVAC systems and will also have strong background in installation works.

Requirements for the Mechanical Engineer: 

1-Knowledge of installation in HVAC duct, equipment’s 3+ years’ experience in site works at the project. 
2-Diploma in mechanical engineering. 
3-Ability to interact with multiple levels of management, associates and third party vendors. 
4-Strong knowledge and understanding of HVAC projects 
5-Must have excellent computer skills and good knowledge of AutoCAD software 
6-Excellent verbal and written communication skills. 


Kindly drop your CV on the given below email address: - 
hr.department07@gmail.com 

3-Mechanical Engineer (Plumbing + Fire Fighting)

An engineer must have experience of maintenance, installation & troubleshooting of both Plumbing & Firefighting Systems.

Iqama must be Transferable. 

Total Vacancies: 1

Reputed Company
Location: Riyadh

Minimum Experience: 5 years
Everything will be discussed during an interview.

Send your cv at an email: mbm_2023@yahoo.com

Note: Apply, only if you are in Saudi Arabia (Visa is not available).

Please, relevant experienced persons can send the CV.

4-Required Aramco Approved Welding QC and Piping QC Inspectors

Dear All,

We have Urgent Requirement for following categories 

1. Welding QC Inspectors Aramco Approved 

2. Piping QC Inspector Aramco Approved

3. Fabricators

4. Pipe Fitters

5. Electricians

Site : Jubail and Jizan

If available Please send the CV,Approval and Documents to info@yellowappleksa.com

5-Mechanical engineer (firefighting)

resourceful mechanical Eng. in firefighting systems ,code and standards
-know the saudi civil defence regulations.
-estimation,planning,execution,manpower management.
-analytical organized and managing skills.
-have strong desire to develop and improve.
-professional computer capability. 

kindly apply if the above criteria is satisfied send your CV to:-
hrsend2017@gmail.com 

6-PIPING ENGINEERS (PIPE LINE EXPERIENCED )

WE ARE LOOKING PIPING ENGINEERS WITH PIPELINE EXPERIENCE


INTERESTED CANDIDATES CAN FORWARD CV'S AT thanzil66@gmail.com

7-HVAC & Chiller Maintenance Technicians (only Transferable Iqama Holders)

MOD Group of Company is looking following Maintenance Technicians:
Only Transferable Candidates are advise to send their CV in word format. 


All interested Candidates are advise to please mention their location & watts App numbers in your cv. 
Shortlisted Candidates will be contacted through the mobile & watts App. 

Salary Package: SR. 3200 to 4000 Plus ( Transportation and Accommodation provided by the company) Depends on Experience & Practical Test 

All interested Candidates are advise to please mention their location & watts App numbers in cv. 
Shortlisted Candidates will be contacted through the mobile & watts App. 


1) Chiller Maintenance Technicians=10 

2) HVAC Technicians = 20 

JOB DESCRIPTION OF HVAC TECHNICIAN: 

The HVAC technician will be primarily responsible of different types of air conditioners (split, concealed, cassette, floor standing, package units and centralized air conditioning units) troubleshooting & repair. 

Duties and Responsibilities: 

• Should able to work independently. 
• Strong knowledge in HVAC maintenance. 
• Should have skills in repairing and maintenance for all types of air conditioners in flats, villas, high raise bldg, hotel, commercial Bldg or Banks. 
• Basic knowledge of electrical is essential. 
• Skills in installation works for A/C equipment's Central Plant, AHU’s Package Plant, FCU, Duct able Split unit. 
• Execute the Preventive Maintenance procedures. 
• Report to the superior on identification of any fault at the system. 
• Work experience in capacity as A/c Technician /similar operation is essential. 
• Should be familiar with tools and equipment as per the trade e.g. such as manometer, manifold gauge, oxy-acetylene outfit, vacuum pump, Tog testers, Multi meter & etc. 
• Any other duties as allocated. 

Requirements: 

Education & Training: Technical Certificate course in Air conditioning & Refrigeration from a recognized Board / Institute. 


Experience: 3 - 5 years gulf experience 

Skills/Ability: Good communication skills, self-motivated, good character & appearance, proactive nature, team working spirit and good in spoken and written English 

Warm Regards 
munirshad66@gmail.com

8-Urgent Required PIPING ENGINEER & SUPERVISOR

Urgent Required Piping Engineer & Supervisor for the short-term project maximum 5+years of experience in KSA. So feel free to call or Send your CV & all work experience certificates to this E-mail   info@greendotsksa.com

9-URGENT REQUIREMENTS

Urgent req for Civil, Mech, E&I QC if any available please send your Cvs in the mail mentioned 

 m.ickbal@ktech.sa.com

10-Safety Officer, Safety Supervisor Transferable Iqama (Aramco Approvel)

Long Term Project

1- Safety Officer ( Aramco Approved) 5 No's

2- Safety Supervisor ( Aramco Approved) 3 No's

Transferable Iqama Or Rental Bases
Immediate Mobilization

Preferable Nationality: Indian, Pakistan 

If you have available candidates, please send your CV and all others related document at the earliest.

SAUDI DAZ COMPANY LIMITED 
101 Business Tower, Office No. 408 
P.O. Box 735, Al-Jubail 31951, KSA

khalilmalik155@gmail.com

Thanks & Best Regards,

11-Project Manager

Experaince: 3 to 5 years with SEC distribution contractor in Saudi Arabia
Qualifiction: Graduation in Electrical Engineer
Age: Up to 35
Job Discription: Well versed with complete SEC Distribution Underground and Overhead Standards.should be able to execute Electrical Distribution Project efficiently and independently.
should coordinate, built relation and image with client (SEC)
Saudi Electricity company   :-  eng.tariqshah.oes@gmail.com

12-System Engineer

-Studying the status of system.
-Identify the gap of current systems.
-Identification of requirements for new/modified systems.
-Analysis of the system with departments and related to any external or internal.
-Identify relationships and links to the system.
-Create a database that includes the required data file and be updated.
-Design Screens and models and the possibility of work in addition to the systems applied to the customer and related to the failure.
-Preparing the required reports in according to the need of the project integration of the system/migration.

Salary: SAR 4500 (negotiable)

Interested and eligible candidates kindly send their CV on ilyas.arif@effectadvisory.com

13-Draftsman ( ElectroMechanical ) KABAYAN

Draftsman to help the design team with ElectroMechanical and workings drawing.

Good experience ar preparing Achitectural, Electrical and Plumbing drawing. 


* Productive and commited to Projects deadline.

*Revise drawings and layouts to accomodate changes and enchanments. 


*Good personal attitude towards co-employer and should have good communication skills as we have to deal with managers, engineers & techinicians even clients to develop shop drawings. 


* Should have good analytical skills as well as posses presentation skill to make the drawing look more elegant with clarity & precision. 


Qualification:


1-3 years of working experience as autocad draftsman


* should have transferable iqama and willing to start immediately. 

Please contact the number below for further inquiry.

0552577521

14-Urgent Requirement Piping-Mechanical QC

Piping-Mechanical QC (4 Nos)

Must Be Aramco Approval
Work Side: Haradh Aramco Gas Project

Office Location
MTE, Near Dawa Center, Jubail

Email: mdnaeem18@gmail.com

15-MECHANICAL QC SUPERVISOR (ARAMCO approved)

Please be informed, we have an urgent requirement for a MECHANICAL QC SUPERVISOR (ARAMCO approved) . So those who are available immediately for transfer, please sent CV and documents to mentioned ID at the soonest.
Eligible candidates will be contacted by recruitment team very soon.

 libinkk@unisisengineering.com

Plumbing Materials Name , Picture and Function

• Plumbing Materials Name , Picture and Function

• Types of Pipe Fittings

  • Adaptor
  • Barb
  • Coupling
  • Cross
  • Double Tapped Bushing
  • Elbow
  • Mechanical Sleeve
  • Nipple
  • Plug and Cap
  • Reducer
  • Tee
  • Union
  • Valve
  • Wye
    

Adaptor

Adaptors connect pipes that are not the same type. Because an adaptor can be male or female on one end, it can turn a pipe male or female.

If ends are non-threaded, they are left to be welded, soldered or glued to the pipe. Adaptors are used for PVC and copper piping.

Barb

A barb connects hoses to pipes. It is usually male at one end. The other has a barbed tube, which is a ridged and tapered cone.

It may also have a type of clamp to keep it secure. Barbs are made of plastic if they carry cold water and brass if they carry hot water.

Coupling

A coupling makes it easy to connect two pipes that have the same diameter and are the same type. It’s also used to repair a broken or leaking pipe. Along with a normal coupling, two other types are the compression coupling and slip coupling.

The compression fitting is connected between two pipes via rubber seals or gaskets on both sides which prevents leaking. A slip coupling includes two pipes, one of which slides out of the other pipe to a various length, to repair a specific length of damaged pipe.

Cross

A cross fitting has openings on all four of its ends and can connect four pipes. Cross fittings come with three inlets and an outlet or three outlets and an inlet.

Because they are the connecting point for four pipes, they are under more stress than other types of fittings and typically built tougher than other fittings.

Double Tapped Bushing

This is a type of nipple, but it has threading on both the inside and the outside. Because this center hole is threaded (tapped) from both top and bottom, it’s referred to as double-tapped.

A double tapped bushing is also a type of reducer, but does not have a reducer’s flexibility. A double tapped bushing is usually female.

Elbow

Not surprisingly, this sort of fitting has a bend that reminds you of the arm joint. They help the flow of water change direction. Elbows come in several degrees, including 22.5, 45, and 90 degrees.

Reducer elbow variations also exist for when the piping diameters being connected are different. Elbow fittings can be made of different materials, and most are female.

Mechanical Sleeve

This connects two pipes through the use of a screw or other device. This makes the fitting easy to install. The mechanical sleeve or coupling is usually made of rubber that is inserted inside a metal jacket (stainless steel clamp).

Report this ad

Nipple

This is a short fitting that can be made of metals such as copper, brass or steel or chlorinated polyvinyl chloride (CPVC). Instead of connecting two pipes, a nipple connects two fittings.

If it has a continuous threading, it is a closed nipple. They are usually male and come in varying lengths.

Plug and Cap

Plugs and caps are both used to close up pipe openings during inspections and repairs. The main difference is that a plug is male while a cap is female. Most often, caps and plugs are threaded.

Plugs and caps are made of several materials, including metal, plastic or rubber and can be welded, soldered, glued, or threaded into the pipe.

Reducer

This fitting makes a flow smaller and thus reduces it. Reducers come in two types. The concentric reducer joins two pipes on the same axis, and the eccentric reducer is used to join pipes of different diameter

The concentric reducer looks like a cone, while eccentric reducers look somewhat like bells with offset center lines. They prevent air bubbles in the pipes.

Tee

A tee has an inlet and an outlet and is shaped like the letter “T.” These fittings come in different sizes and are considered sturdier than the cross fitting.

A diverter tee is used in heating systems that use water. They come with directional markings and need to be installed correctly for the system to operate.

Union

Unions can have either male or female threads. They are similar to couplings, but the difference is unions are easy to remove making them convenient for maintenance or a planned future replacement.

A coupling, on the other hand, is more permanent and needs to be cut out. A union contains three parts:  nut, male end, and female end. The nut is used to join the male and female ends.

Valve

Valves allow the flow of fluids to be adjusted. There are different types, including throttling, non-return and isolation. Non-return valves only allow the liquid to flow in one direction and are often found in drains. They’re also called check valves.

Report this ad

Isolation valves sequester a part of the plumbing system so that the system can be serviced or maintained. These valves are either left open or left closed all the time. However, because they may need to be used in a emergency, they should be checked now and then to see if they’re operational.

Throttling valves control the pressure and amount of a fluid. Because this stresses the mechanism, they tend to wear out faster than other valves. They are usually installed near isolation valves.

Wye

Built in the shape of the letter “Y,” this fitting is made to connect three pipes. Y fittings allow the pipes to change their elevations and to branch out into fresh water lines or drains.

Wyes are similar to tee fittings but the smoother angling reduces friction and turbulence in the water. This fitting is most commonly used to connect a vertical drainpipe to a horizontal one.